Our Tooling Range includes:
Press tool punches in metric & imperial sizes |
| Material: |
Standard H.S.S M2, also available in A2, D2, Carbide |
| Standard Sizes: |
Range from 5mm to 40mm other sizes on application. |
| Type: |
Blanks, Round, Oblong, Hex, Square, Rectangular, Pilot, Ejector plus Special requirements |
| Style: |
Headed, Plain, Ball Lock and customised requirements |
| Coating: |
T.I.N & CA Coatings available on request |
Die sets |
| Shapes: |
Standard Shaped, Steel Rectangular or Custom sets |
| Choice of components: |
Solid, Demountable and Precision Pillars.
Bushes, Demountable Sintered Bronze and Standard.
Ball Bearing, Guide Pillars, Cages, Demountable Pillars, Bushes &
Cages.
|
Die Type: |
Die Size: |
| Rear Pillar : |
Range 75mm x 55mm - 305mm x 230mm |
| Diagonal: |
Range 63mm x 63mm - 215mm x 140mm |
| Circular: |
Range 75mm - 175mm |
| Rectangular: |
Range 63mm x 75mm - 185mm x 150mm |
| Steel Rear Pillar : |
Range 160mm x 100mm - 800mm x 533mm |
| Steel Centre Pillar: |
Range 70mm x 160mm - 610mm x 800mm |
| Steel Diagonal Pillar: |
Range 70mm x 160mm - 610mm x 630mm |
| Steel Four Pillar: |
Range 160mm x 125mm - 800mm x 630mm |
| Ball Bearing Rear Pillar: |
Range 160mm x 100mm - 800mm x 630mm |
| Ball Bearing Centre Pillar: |
Range 160mm x 80mm - 800mm x 630mm |
| Ball Bearing Diagonal Pillar: |
Range 160mm x 125mm - 800mm x 630mm |
| Ball Bearing Four Pillar: |
Range 160mm x 125mm - 800mm x 630mm |
| Steel Rear Pillar : |
Range 205mm x 155mm - 405mm x 505mm |
| Steel Centre Pillar: |
Range 205mm x 155 mm - 505mm x 505mm |
| Steel Diagonal Pillar: |
Range 205mm x 155mm - 505mm x 505mm |
| Steel Four Pillar: |
Range 205mm x 155mm - 505mm x 505mm |
High Quality Urethan Products: |
| Standard sizes: |
12mm - 75mm dia.
25mm - 100mm Square in varying lengths
|
| Available in: |
Round Rod, Strippers, Forming Blocks and Buffers.
|
High Quality Performance Die Springs: |
| TIPCO High quality, high performance die springs manufactured from Chrome Vanadium steel are designed to meet the exacting standards within the stamping industry.
|
| Range: |
19mm (3/4) - 50mm ( 1.000” ) O/Dia.
25mm (1.000) - 150mm ( 6.000”) Length
|
High Quality Performance Gas Springs: |
| Available on request |
Pillars: |
| Are manufactured from Chromium Nickel material, machined and ground to very close tolerances ensure quality alignment at all times. Offered in Press fit or demountable format. |
| Range: |
18.0mm thru 80.0mm O/Dia x 100mm thru 400mm Length
Imperial sizes are available on request.
|
Bushes: |
| High quality precision machined available as Plain or Bearing type, permit almost frictionless movement and stability, allowing the accurate setting of punches and dies. |
| Range: |
18.0mm thru 80.0mm O/Dia x 50mm thru 148mm Length
Imperial sizes are available on request.
|
Cages: |
| Made from tough wear resistant quality aluminium alloy, with spiral pattern ball bearings minimising cracking or grooving assure uniform wear. |
| Range: |
18.0mm - 80.0mm
Imperial sizes are available on request. |
Many of our standard products are available from stock, lead times on specials may vary dependent on quantity and machining time this will be discussed at the enquiry stage and confirmed at the point of order.
Click hereto link to the Tipco online catalogue of products
